How To Spool A Spinning Reel (A Beginner’s Guide)

This article discusses the various methods about How To Spool A Spinning Reel to prevent line twists and tangles. Fishing can be extremely relaxing and enjoyable at times, but maintaining control over the lines can sometimes be difficult, making it possible to miss your day’s catch.

How To Spool A Spinning Reel

How To Spool A Spinning Reel

You can spool a spinning reel to perform routine maintenance or fix a line quickly if you follow an easy process. It only takes a couple of minutes to select your line, load the reel, and spool the reel, and you’ll soon be fishing. Following these simple steps will ensure you won’t have any problems spooling your spinning reel.

Choose The Line

Choose The Line For Spinning Reel

To select the right fishing line for your project, you must first consider the type of fishing you’ll be doing. You should use a monofilament line if you want to fish with floating bait. It features a single strand that tends to have an excellent stretch. Generally, fishing with a monoline works better when you’re using live baits or jigs.

The fluorocarbon line may be the best choice for fishing in calm shallow water. The fish are unlikely to notice fluorocarbon lines underwater since they are challenging to see. The lines containing fluorocarbon are more sensitive to bites.

You should use braided fishing lines if you plan on going bottom fishing. The braiding synthetic fibers make these lines. Whenever the fibers used in the line, they can achieve an incredibly high braking strength. For a great day on the water, consider your style of fishing, target species, the environment, etc. to pick the right line.

 Load the Reel

You first need to determine whether the reel is rotating counterclockwise or clockwise. When you turn the reel a few times, you can determine the direction by holding it like fishing.

The reel must be gripped tightly when the casting hands’ fingertips are wrapped around the mounting bar, and the other hand is hanging from the rod. If the reel does not hang from your finger, wrap your casting hands around the mounting bar and continue to cast.

During this step, flip the bail open by lifting the handle. To close the bail, it must flip the handle. You should remove any unused or old fishing line from the spool during this stage. You will then secure your line with guides and string it. Small circles serve as guides for the line so that it stays in its desired location.

Check for Twists

Make sure the reel’s label is facing up when you place the reel on the floor. Install the bail and ensure the line properly loaded into the reel correctly. It is essential that your spool lines up precisely with the reel so that the lines enter the reel in the same manner they came off. You should flip your label over if your line appears to twist or doesn’t line up after placing the label facing up just if it has problems aligning.

Crank the Reel

Using the pinch method, gently crank the reel as the line is wound. Let the line slide through your fingers as you crank the reel about  dozen times. If your line twists, you need to fix it. If your reel begins to twist, you should remove some line and re-align your spool. Ensure the line does not become loose and tangled by applying firm pressure while loading.

An easy way to make sure your line is properly inserted into the spool is to ask your friend to assist you.  The Wheel-shaped packages commonly used for lines, with usually a hole in the middle. It is much faster to crank the line using the help of a friend as you apply slight tension, so have a friend to help you.

When you have confirmed that the line is not twisting, you can move the reel to the following location while loading the lines. You should monitor your line twists by stopping between 20-30 cranks. It is recommended to restart the process if the line twists. You should straighten the line twists after the first inspection, though, and proceed slowly if you flipped the spool.

 Fill the Spool

Make this motion continues until the spool is an eighth of an inch away from the rim. Having enough line on hand avoids overloading the reel and will allow you to use the reel without getting frustrated. Even if you decided to cut some large pieces of fishing line as you cleared snags, you would still have enough remaining. It’s not a good idea to under-fill or overload your reel, as those will lead to tangles on the lines, making your casting difficult and less precise.

Cut the Line

Cutting the line directly alongside the supply spool should be done with line cutters or scissors. You should secure the free end of the line with a lure while leaving some allowance for your fishing line. Also, you can apply a piece of tape to the free end of the spool to prevent it from unraveling.

Secure Your Line

Finally, secure the free end of the line with a swivel, lure, or clip after you spool your line to prevent it from slipping through the guides.

Frequently Asked Questions

What size of reel would be recommended for bass fishing?

The biggest reels, such as a 4000 or 4500, could technically be used for bass fishing. But they are better for fishing larger fish, most likely in saltwater. For example, Cod, Snapper, and Bone Fish would be typical predators to catch with a 40/45.

How to put a line on a reel?

According to most experts, you should put enough line on your reel until the gap between the line and the top of the spool is less than 1/8 inch. It’s not recommended to fill it up entirely since you will never use all of it, nor half full, since the casting seems to be less effective.

Final Thought

It’s easy to learn how to spool a spinning reel with a bit of practice, as illustrated above. This process is most successful if you make sure you pick the right line: choose a reel suitable for the reel and load it adequately. Furthermore, avoid twisting the lines by applying firm pressure to them as you load them.

 

Leave a Comment